Workday Workday-Pro-HCM-Reporting Real Exam Questions Test Engine Dumps Training With 61 Questions
Workday-Pro-HCM-Reporting Actual Questions Answers PDF 100% Cover Real Exam Questions
NEW QUESTION # 19
A customer was receiving a report on a weekly basis but has not received it since the new year started.
What task should you use to confirm the report frequency?
- A. Mass Operation Management
- B. Scheduled Future Processes
- C. View Alerts
- D. Run History
Answer: B
Explanation:
When a report is scheduled to run at a recurring interval (daily, weekly, monthly, etc.), Workday tracks this under the Scheduled Future Processes report. This task allows administrators and report owners to view when reports are set to run, the frequency of execution, and the schedule start and end dates. If a report stopped running after the new year began, the most likely cause is that the scheduling end date expired on December 31, meaning no new jobs were generated for the new year.
From the Workday Reporting binder: "Workday provides scheduling options to run reports at set frequencies. You can confirm upcoming scheduled report runs in the Scheduled Future Processes report." This provides visibility into whether the report is still scheduled and when it is next expected to execute.
The other answers are incorrect: View Alerts relates to system notifications, Mass Operation Management is not for reporting, and Run History shows past runs but not future scheduling. The correct option is C. Scheduled Future Processes.
NEW QUESTION # 20
A user needs to view additional data on the delivered Headcount By Job Profile report.
What should you recommend?
- A. Copy and modify the standard report
- B. Edit the standard report
- C. Create a custom report from scratch
- D. Export the standard report to a data warehouse
Answer: A
Explanation:
Workday delivers many standard (delivered) reports that are available to all customers. These reports are a great starting point but are not editable directly. If the delivered report does not meet your requirements, you should copy it and then modify the copy to create a custom report. This ensures that you retain the delivered report as-is, while still tailoring the report output to your business needs.
From the Workday Module 1 and 2 Reporting sections:
"Workday delivers standard reports that are available for all customers. If necessary, you can copy many of the Workday-delivered reports to create a custom report and modify it as needed."
"There still may not be a report that meets my specific needs though. In that case, I can either create a report from scratch or copy a delivered report and make changes."
"Standard reports are already available in all customer tenants and span across the functional areas in Workday. Workday creates standard reports using either the report writer tool or XpressO. However, you can copy and modify reports created with report writer as needed." Therefore, the correct recommendation is to copy and modify the delivered Headcount By Job Profile report (Option D) instead of editing the original.
NEW QUESTION # 21
An HR analyst needs to schedule a collection of diversity reports to the HR director on a monthly basis. What mechanism should the HR analyst use to do this?
- A. Alerts
- B. Report groups
- C. Report bursting
- D. Embedded analytics
Answer: B
Explanation:
Report groups allow multiple reports to be bundled together and scheduled as a package to distribute at a set frequency. In this case, the HR analyst can group all diversity-related reports and schedule them to run automatically each month for the HR director.
The Workday documentation explains: "Workday provides additional reporting features such as sharing, scheduling, and exporting reports. Reports can be grouped into report groups for easier scheduling and delivery." .
While Report Bursting is used for distributing a single report with different data slices (e.g., sending each manager their team's results), it is not suited for bundling multiple different reports. Embedded analytics are dashboards, not scheduling tools. Alerts notify users of conditions but do not manage recurring report packages.
Therefore, Report Groups is the correct method for scheduling multiple reports together.
NEW QUESTION # 22
A worker report uses a filter based on the Location field, using the comparison type Prompt the user for a value. A user runs this report and leaves the prompt value blank.
What Worker instances display on the output?
- A. Only Worker instances where the Location field value is blank
- B. Only Worker instances where there is a value of the Location field
- C. All Worker instances, regardless of the value of the Location field
- D. No Worker instances, regardless of the value of the Location field
Answer: C
Explanation:
Workday report filters allow prompts so users can enter values when running a report. If the prompt value is left blank, Workday treats it as though no filter condition has been applied, so the system returns all available Worker instances regardless of the Location field.
From the Workday Reporting guide:
"Prompts - You can further narrow and refine your report results by having the user complete prompt fields before they run the report. You can set default values for prompts... If left blank, the filter condition is ignored and all data is returned." Therefore, the correct answer is D. All Worker instances, regardless of the value of the Location field.
NEW QUESTION # 23
A recruiter is running a dashboard and no data is appearing in the Top New Applications by Job Profile worklet tile.
What could be the cause of the issue?
- A. The dashboard configuration does not include Top New Applications by Job Profile as a required worklet.
- B. The recruiter does not have access to the Top New Applications by Job Profile report.
- C. The recruiter does not have access to the domain securing the dashboard.
- D. The recruiter has constrained access to the report's data source or data source filter.
Answer: D
Explanation:
If a recruiter sees an empty dashboard tile, the most likely cause is constrained security access. Even though the dashboard is properly configured and the worklet is enabled, Workday's security framework ensures that report results vary by user depending on their role and assigned constraints.
From the Workday Reporting binder: "Report results differ between users if security constraints apply. Constrained security groups grant access only to a subset of data... Unconstrained security groups grant users access to all target instances of a securable item." .
In this scenario, the recruiter likely has constrained access to only their supervisory organization or region. As a result, the "Top New Applications by Job Profile" report returns no records in the worklet tile.
Other options are less likely: if the recruiter lacked access to the report entirely, the tile would not appear; required vs. optional dashboard configuration would not impact existing data visibility; and domain-level security applies to report access, not data filtering.
Therefore, the correct answer is C. The recruiter has constrained access to the report's data source or data source filter.
NEW QUESTION # 24
Two people run the same report. One person can view all columns but the other person can only view some columns.
Why is the second user missing columns?
- A. The second user is not the report owner.
- B. The second user does not have access to the domain that secures the field.
- C. The first user did not manually share the report with the second user.
- D. The report uses an indexed data source.
Answer: B
Explanation:
Access to report fields in Workday is governed by security domains. If a user lacks access to the security domain that secures specific report fields, those fields will not appear in the report output for that user.
From the Workday Reporting documentation:
"A security group gets access to a security domain, which is a predefined set of related securable items. Securable items can include reports, tasks, data sources, and report fields." Therefore, the correct answer is C. The second user does not have access to the domain that secures the field.
NEW QUESTION # 25
Refer to the following scenario to answer the question below.
You have prepared the following matrix report for a recruiting manager.
The recruiting manager would like to view the top ten hiring sources, rather than just three.
How can you adjust the report definition to address this requirement?
- A. Edit the Maximum Number of Rows field.
- B. Edit the Sort Rows field on the Row Grouping column.
- C. Configure a Field Values group on the Group by Field.
- D. Edit the Axis Scale on the Output tab.
Answer: A
Explanation:
In Workday matrix reports, the number of rows returned is controlled by the Maximum Number of Rows setting. By default, reports may limit output rows (for example, showing only the top 3). To display more results-such as the top 10 hiring sources-you must increase this value in the report definition.
From the Workday Reporting documentation:
"You can limit or expand the number of rows displayed in a matrix report by editing the Maximum Number of Rows field."
"To display more than the default, update the value in the report definition." Therefore, the correct way to adjust this report to display the top 10 hiring sources is B. Edit the Maximum Number of Rows field.
NEW QUESTION # 26
The HR administrator is complaining about a report that is running slowly. The report uses the Trended Workers data source and includes a field on the related Worker business object.
How can you improve report performance without altering the report requirements?
- A. Add the field to the Trended Workers data source.
- B. Run the Create Worker Trending Data task.
- C. Create a calculated field on the Trended Worker business object.
- D. Run the Purge Worker Trending Data task.
Answer: A
Explanation:
Performance issues often occur when trending reports pull fields from related business objects instead of directly from the Trended Workers data source. This requires Workday to join across objects at runtime, slowing down report execution. To improve performance, you should add the required field to the Trended Workers data source, ensuring the data is pre-joined and optimized for trending.
From the Workday binder: "To improve performance, add commonly reported fields directly to the Trended Workers object. Using related business object fields requires additional joins and increases report runtime." Creating calculated fields adds complexity rather than improving speed. Purging or re-creating trending data maintains system hygiene but does not address field-level performance.
Thus, the correct solution is A. Add the field to the Trended Workers data source.
NEW QUESTION # 27
You configured a trending report for an HR analyst that shows headcount by country trends by quarter. The HR analyst has asked for the data to display for each month, rather than each quarter.
How can you fulfill these requirements?
- A. Run the Maintain Trended Workers task and modify the Trending Period.
- B. Edit the Group by Time Period field in the report definition.
- C. Add a report prompt that uses the Trending Period field.
- D. Edit the field on the Column Grouping grid in the report definition.
Answer: B
Explanation:
When designing trending reports, the Group by Time Period field determines how the trended records are aggregated and displayed. By default, reports may show quarterly or annual rollups, but this can be easily adjusted to monthly without needing to reconfigure or regenerate trending data.
From the Workday documentation: "In trending reports, the Group by Time Period setting allows users to choose the granularity of the results, such as monthly, quarterly, or annually. This setting controls the display of data in charts and tables." Other options are less appropriate: editing the Column Grouping grid changes report layout but not trending intervals, using a prompt does not change aggregation, and running the Maintain Trended Workers task changes system-wide trending setup, not individual report display.
Thus, the correct approach is B. Edit the Group by Time Period field in the report definition.
NEW QUESTION # 28
You are building a composite report that uses two subreports with different data sources. You are noticing duplicate prompts when you run your composite report.
How can you resolve this problem?
- A. Select the Do Not Prompt at Runtime checkbox for the overlapping prompts in each subreport.
- B. Configure the same default value for each duplicate prompt.
- C. Configure a prompt set on the composite report in the Report Settings.
- D. Select the Do Not Prompt at Runtime for one of the duplicate prompts in the Report Settings.
Answer: C
Explanation:
When using multiple subreports in a composite report, duplicate prompts often occur if both subreports request similar information (e.g., Company, Date, or Supervisory Organization). The best practice in Workday is to configure a Prompt Set at the composite level. Prompt sets allow you to consolidate duplicate prompts into one, mapping the same input across multiple subreports.
From the Workday documentation: "Composite reports allow prompt consolidation through Prompt Sets. Configure prompt sets in the composite report's Report Settings to eliminate duplicate prompts and provide a streamlined user experience." Other answers are less efficient: assigning the same default value does not eliminate duplication, suppressing prompts with "Do Not Prompt at Runtime" removes flexibility for end users, and handling only one duplicate prompt does not consolidate across subreports.
Therefore, the correct solution is A. Configure a prompt set on the composite report in the Report Settings.
NEW QUESTION # 29
The Chief People Officer is running the Headcount by Year report and getting different results than an HR analyst, who is the report owner.
What is a possible cause of this?
- A. The Chief People Officer does not have access to the data source filter.
- B. The HR analyst did not properly transfer ownership of the report to the Chief People Officer.
- C. The HR analyst did not share the report with the Chief People Officer.
- D. Both the Chief People Officer and HR analyst have constrained access to the data source.
Answer: D
Explanation:
Reports in Workday respect data source security constraints. Different users may see different results in the same report if their access is limited. For example, an HR analyst may have constrained access only to certain organizations or workers, while the Chief People Officer may also have constraints.
From Workday Reporting and Security documentation:
"Report results differ between users if security constraints apply. Constrained security groups grant access only to specific target data (e.g., workers in certain supervisory orgs), while unconstrained groups can view all data." Thus, the likely cause is that both the Chief People Officer and the HR analyst have constrained access to the data source. Correct answer: C.
NEW QUESTION # 30
You have created a composite report and are trying to add a matrix report as a subreport. However, when trying to configure a Data column, the matrix report is not available to select in the Sub Report Name field.
What can you check to identify the cause of this issue?
- A. Check that every field in the composite report's set of fields that are enabled for filtering and grouping also exists as a group-by field in the matrix report.
- B. Check that the summarization fields in the matrix report also match the selections in the Field to Aggregate field in the Data column settings.
- C. Check that the prompt defaults in the matrix report align with the prompt defaults defined in the composite report's Report Settings.
- D. Check that the configurations on the Filter Data in Sub Report grid also exist in the Filter tab of the matrix report definition.
Answer: A
Explanation:
For a matrix report to be used as a subreport in a composite report, the group-by fields in the matrix report must align with the fields enabled for filtering and grouping in the composite report. If this alignment does not exist, Workday does not allow the matrix report to appear as a valid subreport option in the Sub Report Name dropdown.
From the Workday binder: "To include a matrix report as a subreport in a composite, the group-by fields of the matrix must match the fields enabled for grouping in the composite report. If these do not match, the matrix will not appear in the Sub Report Name selection." Other factors such as prompt defaults or filter settings may impact usability, but they do not prevent the matrix report from being selectable. The key dependency is the field alignment between the composite and the matrix group-by fields.
Therefore, the correct answer is A. Check that every field in the composite report's set of fields that are enabled for filtering and grouping also exists as a group-by field in the matrix report.
NEW QUESTION # 31
A composite report sorts output based on the last column in ascending order. You want the sort to be based on the second to last column in descending order.
Where do you make this change?
- A. Combine data row
- B. Second to last column
- C. Report settings
- D. Dynamic data row
Answer: B
Explanation:
In Workday composite reports, sorting behavior is controlled at the column level, not globally. Each column in a composite report can be configured with its own sort order (ascending or descending). When a composite report is sorting by the last column, it means that column has an active sort configuration applied.
To change the sort to the second to last column and set it to descending, you must edit that specific column's configuration and adjust the sort settings accordingly. Workday evaluates column sorting in sequence, and the active column-level sort determines the output order.
From the Workday HCM Reporting documentation:
"Composite reports support column-based sorting. Sorting is defined within the column configuration and determines the order in which results display."
"To change sort behavior, update the sort settings on the appropriate column." The other options are incorrect because dynamic data rows control layout flexibility, combine data rows merge subreport results, and report settings manage prompts and general options-not sorting logic.
NEW QUESTION # 32
You have received a request for a new custom report that is similar to the Workday-delivered report Compare Workers, and you run the Workday Standard Reports report.
What information can you use to determine if you can copy Compare Workers to create a new custom report?
- A. The report shows Report Writer in the Type column.
- B. You can access the report's Related Actions from the Report column.
- C. The report shows Yes in the Schedulable column.
- D. The Description column is not empty for the report.
Answer: A
Explanation:
The Workday Standard Reports report lists all delivered reports and key attributes. Only standard reports created with the Report Writer tool can be copied and modified into custom reports. The "Type" column indicates whether the report is a Report Writer report.
From the Workday Reporting documentation:
"Workday delivers standard reports that are available for all customers. If necessary, you can copy many of the Workday-delivered reports created with the report writer to create a custom report and modify it as needed." Thus, the correct indicator is C. The report shows Report Writer in the Type column.
NEW QUESTION # 33
You are configuring a matrix report that shows workers' average base pay by job profile. You would like to add a field to the Detail Data that shows a worker's compensation group, which is data that is associated with the Job Profile business object.
- A. Lookup Hierarchy
- B. Extract Single Instance
- C. Evaluate Expression
- D. Lookup Related Value
Answer: D
Explanation:
The Lookup Related Value function retrieves a value from a related business object. Since Compensation Group is not stored directly on the Worker object but instead through the Job Profile business object, this function lets you traverse the relationship to return the related field into your report.
From Workday Reporting documentation:
"Lookup Related Value - Returns a field from a related business object. Use this to bring data from associated objects into a report when the field is not directly available on the primary object." Therefore, the correct answer is C. Lookup Related Value.
NEW QUESTION # 34
You need a calculated field that returns whether or not the initiator for a Manage Goals event is the worker's manager.
- A. Evaluate Expression Band
- B. Evaluate Expression
- C. True/False Condition
- D. Lookup Related Value
Answer: C
Explanation:
The True/False Condition calculated field is used to return Boolean results (True or False) based on defined criteria. In this scenario, the field must evaluate whether the event initiator equals the worker's manager. By setting that condition, the calculated field will return True if the initiator is the manager and False otherwise.
From Workday Reporting documentation:
"True/False Condition - Creates a Boolean field that evaluates a condition and returns True or False depending on whether the condition is met." Thus, the correct answer is B. True/False Condition.
NEW QUESTION # 35
You want to create a report that groups all employees by area code. However, the field you are pulling from contains the entire phone number.
- A. Format Text
- B. Concatenate Text
- C. Format Number
- D. Substring Text
Answer: D
Explanation:
The Substring Text function in Workday calculated fields extracts a portion of a string based on character position and length. To capture the area code from a phone number (e.g., the first three digits of a 10-digit number), you define the substring starting at position 1 with a length of 3.
From Workday Reporting documentation:
"Substring Text - Returns a portion of a text string based on a starting position and specified length." Example: Phone number 4155551234 → Substring(1,3) = 415.
Therefore, the correct choice is A. Substring Text.
NEW QUESTION # 36
A user needs to view additional data on the delivered Headcount By Job Profile report.
What should you recommend?
- A. Copy and modify the standard report
- B. Edit the standard report
- C. Create a custom report from scratch
- D. Export the standard report to a data warehouse
Answer: A
Explanation:
Workday delivers many standard (delivered) reports that are available to all customers. These reports are a great starting point but are not editable directly. If the delivered report does not meet your requirements, you should copy it and then modify the copy to create a custom report. This ensures that you retain the delivered report as-is, while still tailoring the report output to your business needs.
From the Workday Module 1 and 2 Reporting sections:
"Workday delivers standard reports that are available for all customers. If necessary, you can copy many of the Workday-delivered reports to create a custom report and modify it as needed."
"There still may not be a report that meets my specific needs though. In that case, I can either create a report from scratch or copy a delivered report and make changes."
"Standard reports are already available in all customer tenants and span across the functional areas in Workday. Workday creates standard reports using either the report writer tool or XpressO. However, you can copy and modify reports created with report writer as needed." Therefore, the correct recommendation is to copy and modify the delivered Headcount By Job Profile report (Option D) instead of editing the original.
NEW QUESTION # 37
You would like to create an advanced report that contains information about employees and their dependents.
Where can you go to identify the field that links the two business objects, Worker and Dependent?
- A. The Related Business Objects tab of the Business Object Details report
- B. The Columns tab of a report definition
- C. The Related Business Object column of the Report Fields report
- D. The business object's Related Actions > Reporting > Report Fields and Values
Answer: A
Explanation:
To connect multiple business objects in reporting, Workday provides the Business Object Details report. The Related Business Objects tab within this report shows how different business objects are linked (e.g., Worker to Dependent). This enables report writers to identify which fields connect the primary and secondary objects.
From the Workday Reporting documentation:
"The report data source provides the view into the primary business object. This object gives you access to class report fields as well as links to related business objects." Therefore, the correct answer is C. The Related Business Objects tab of the Business Object Details report.
NEW QUESTION # 38
You are building a report to identify employees who have exceeded the allowed number of 10 sick days in the current year.
Using the Sick Days Taken field, what is the correct formula to create a Boolean calculated field that returns True if an employee has exceeded the allowed number of sick days?
- A. Sick Days Taken >= 10
- B. Sick Days Taken > 10
- C. Sick Days Taken = 10
- D. Sick Days Taken = False
Answer: B
Explanation:
To check whether a worker's sick days exceed the threshold of 10, you must define a Boolean condition. The expression Sick Days Taken > 10 evaluates to True when the value is greater than 10, and False otherwise.
From Workday Reporting documentation:
"True/False conditions can be created using numeric comparisons such as greater than (>), less than (<), or equal to (=). These return True or False depending on the worker's data." Thus, the correct formula is A. Sick Days Taken > 10.
NEW QUESTION # 39
You are creating a custom report that displays employee salary amounts. You need to ensure that compensation analysts have the appropriate security permissions to view this information for all employees.
How do you confirm the security group's access to salary amounts?
- A. Assign individuals to the compensation analyst security group.
- B. Review the domain security policy on the report's data source.
- C. Review the domain security policy on the salary amount report field.
- D. Run the Activate Security Policy Pending Changes task.
Answer: C
Explanation:
In Workday, access to sensitive data such as salary amounts is controlled at the report field level through security domains. Even if a user has access to the report itself or the data source, they will not be able to see secured fields unless their security group has permission to the domain that specifically secures that field.
The Workday HCM Reporting documentation explains that report fields are securable items and are governed by domain security policies. To confirm whether compensation analysts can view salary amounts for all employees, you must review the domain security policy associated with the Salary Amount report field and verify that the appropriate security group has View (or higher) access.
From the Workday documentation:
"Security access to report fields is controlled by domain security policies. Users must have access to the domain that secures a report field in order to view its data."
"Even when users have access to a report or data source, secured fields will not display unless domain permissions are granted." Running Activate Security Policy Pending Changes applies changes but does not confirm access. Assigning users to a security group does not ensure that the group has the correct domain permissions. Reviewing only the data source security is insufficient because salary visibility is controlled at the field/domain level.
NEW QUESTION # 40
The benefits manager position has recently been filled by a different worker. The previous benefits manager has transferred ownership of the report schedules to the new manager. Month end is coming up and the new manager is wondering which reports are scheduled to be run automatically.
Where can the manager view this information?
- A. My Tasks
- B. The Process Monitor report
- C. The Scheduled Future Processes report
- D. My Reports Library
Answer: C
Explanation:
Workday provides the Scheduled Future Processes report to review which reports are scheduled to run automatically. This report displays the recurrence details and execution times of all scheduled reports, allowing managers to confirm upcoming automated report runs.
From the Workday Reporting documentation:
"Workday provides scheduling options to run reports at set frequencies. You can confirm upcoming scheduled report runs in the Scheduled Future Processes report." Therefore, the correct answer is D. The Scheduled Future Processes report.
NEW QUESTION # 41
A Hire event has an Effective Date of 09/02/2023.
What would be the Record Date of the Hire event on the Trended Workers object?
- A. 10/31/2023
- B. 9/2/2023
- C. 9/1/2023
- D. 9/30/2023
Answer: D
Explanation:
In Workday trending reports, the Record Date for a transaction is not always the same as the event's Effective Date. Instead, trending data is captured based on the periodicity of the trended workers configuration, most commonly set to the end of each month. For Hire events, the Effective Date is when the change takes effect in the system, but the trended data is stored using the month-end Record Date.
From the Workday binder: "Trended Workers captures snapshots of worker data at periodic intervals (e.g., monthly, quarterly). A transaction such as a hire or termination is recorded in trending as of the last day of the period in which the effective date occurs." In this scenario, the Hire Effective Date of 09/02/2023 falls in September. The Record Date is therefore the last day of September, 09/30/2023, not the effective date itself.
Thus, the correct answer is C. 9/30/2023.
NEW QUESTION # 42
How can you capture proposed values relating to a business process event on a report?
- A. Use a data source that is enabled for effective dating.
- B. Apply a report filter that only returns data that contains "proposed" in the field name.
- C. Configure Lookup Value as of Date calculated fields that return field values as of the date before the business process events occurred.
- D. Use an event-related business object as the primary business object or as a related business object.
Answer: D
Explanation:
To capture proposed values from a business process event, you must use an event-related business object. For example, a Staffing Event business object can provide both the current and proposed values of job, location, or compensation during a transaction.
The Workday binder clarifies: "The report data source provides the view into the primary business object. This object gives you access to class report fields as well as links to related business objects." . By selecting an event-related object as the report's data source, you can retrieve pending changes alongside existing values.
Other answers are insufficient: "effective dating" only retrieves data snapshots, and filters cannot detect "proposed" unless tied to the correct object. Lookup Value as of Date would return historical data, not future proposed changes.
NEW QUESTION # 43
......
TrainingDumps Workday-Pro-HCM-Reporting Exam Practice Test Questions: https://vcecollection.trainingdumps.com/Workday-Pro-HCM-Reporting-valid-vce-dumps.html

