Updated PDF (New 2025) Actual Fortinet FCP_FWF_AD-7.4 Exam Questions
Verified FCP_FWF_AD-7.4 Exam Dumps PDF [2025] Access using TrainingDumps
NEW QUESTION # 22
Channel utilization is a primary indicator of the bandwidth used and remaining in a wireless channel. Which other factors or issues can cause high channel utilization?
(Choose three.)
Response:
- A. Large numbers of wireless clients connected to a neighboring AP on the same channel.
- B. Wireless clients using applications that require high bandwidth.
- C. Neighbouring sources of wireless interference, such as a microwave.
- D. Large numbers of wireless clients connected to your own APs.
- E. Large numbers of wireless clients connected to a neighboring AP on a different channel.
Answer: A,B,D
NEW QUESTION # 23
What is the main advantage of deploying FortiAP devices using FortiAP Cloud?
Response:
- A. Direct access to FortiGate configurations
- B. Predictive modeling capabilities for network expansion
- C. Enhanced threat analytics and monitoring
- D. Simplified deployment and centralized management
Answer: D
NEW QUESTION # 24
Six APs are located in a remotely based branch office and are managed by a centrally hosted FortiGate. Multiple wireless users frequently connect and roam between the APs in the remote office.
The network they connect to, is secured with WPA2-PSK. As currently configured, the WAN connection between the branch office and the centrally hosted FortiGate is unreliable.
Which configuration would enable the most reliable wireless connectivity for the remote clients?
Response:
- A. Configure a tunnel mode wireless network and enable split tunneling to the local network
- B. Configure a bridge mode wireless network and enable the Local authentication configuration option
- C. Install supported FortiAP and configure a bridge mode wireless network
- D. Configure a bridge mode wireless network and enable the Local standalone configuration option
Answer: A
NEW QUESTION # 25
WPA3 encryption is optional when configuring a secure wireless network on FortiGate.
Response:
- A. False
- B. True
Answer: A
NEW QUESTION # 26
When configuring a wireless network for dynamic VLAN allocation, which three IETF attributes must be supplied by the radius server?
(Choose three.)
Response:
- A. 81 Tunnel-Private-Group-ID
- B. 58 Egress-VLAN-Name
- C. 83 Tunnel-Preference
- D. 65 Tunnel-Medium-Type
- E. 64 Tunnel-Type
Answer: A,D,E
NEW QUESTION # 27
What two pieces of information are sent by the wireless controller to FortiPresence about connected smartphones?
(Choose two.)
Response:
- A. Signal strength
- B. Cellular provider
- C. MAC address
- D. Battery level
Answer: A,C
NEW QUESTION # 28
When configuring Auto TX Power control on an AP radio, which two statements best describe how the radio responds?
(Choose two.)
Response:
- A. When the AP detects any other wireless signal stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- B. When the AP detects PF Interference from an unknown source such as a cordless phone with a signal stronger that -70 dBm, it will increase its transmission power until it reaches the maximum configured TX power limit.
- C. When the AP detects any interference from a trusted neighboring AP stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- D. When the AP detects any wireless client signal weaker than -70 dBm, it will reduce its transmission power until it reaches the maximum configured TX power limit.
Answer: A,C
NEW QUESTION # 29
What is the primary function of FortiPlanner?
Response:
- A. Wireless network threat analysis
- B. Management of FortiAP devices
- C. FortiGate device configuration
- D. Predictive modeling for wireless network planning
Answer: D
NEW QUESTION # 30
You have just authorized a newly added FortiAP device on FortiGate. It went offline for an extended time without coming back online again. What troubleshooting process must you take to bring FortiAP back online?
Response:
- A. Restart the wireless controller if it is unresponsive for the newly added FortiAP device.
- B. Verify that communication between FortiAP and the wireless controller is not blocked.
- C. Check the power feed to the FortiAP device and PoE status if powered by a switch.
- D. Access FortiAP management using HTTPs.
Answer: B
NEW QUESTION # 31
Which two statements are true about AP profiles?
(Choose two.)
Response:
- A. An AP must be authorized before having a profile applied.
- B. A FortiAP profile must be applied to a FortiAP group.
- C. AP profiles are model specific.
- D. A profile must be applied manually to an AP before it can be managed by FortiGate.
Answer: A,C
NEW QUESTION # 32
When developing the high-level scope phase in wireless design projects, which statement best describes the scope?
Response:
- A. It covers the main topics to analysis existing wireless networks, and issues reports about general performance.
- B. It simplifies wireless design projects only for high-end devices that might require wireless connectivity.
- C. It uses the why, when, what and how questions to determine the goal of the project at a high level.
- D. It determines the top-tier groups that will be responsible for designing the wireless network.
Answer: C
NEW QUESTION # 33
Part of the location service registration process is to link FortiAPs in FortiPresence. Which two management services can configure the discovered AP registration information from the FortiPresence cloud?
(Choose two.)
Response:
- A. FortiGate
- B. FortiAP Cloud
- C. FortiSwitch
- D. AP Manager
Answer: A,B
NEW QUESTION # 34
How does FortiPresence benefit network administrators in managing wireless networks?
Response:
- A. By managing FortiAP device configurations
- B. By optimizing wireless signal strength
- C. By providing insights into user behavior and network usage
- D. By predicting future network outages
Answer: C
NEW QUESTION # 35
When integrating FortiAP devices with FortiGate, which module in FortiGate is responsible for the provisioning and management?
Response:
- A. Security Module
- B. Network Planning Module
- C. Threat Analytics Module
- D. Wireless Controller Module
Answer: D
NEW QUESTION # 36
Overlapping SSIDs in a high-density environment can lead to increased wireless performance.
Response:
- A. False
- B. True
Answer: A
NEW QUESTION # 37
WIDS profiles are primarily used for:
Response:
- A. Enhancing Wi-Fi signal strength.
- B. Deploying firmware updates to APs.
- C. Assigning IP addresses to wireless clients.
- D. Wireless Intrusion Detection System configurations.
Answer: D
NEW QUESTION # 38
......
Try Best FCP_FWF_AD-7.4 Exam Questions from Training Expert TrainingDumps: https://vcecollection.trainingdumps.com/FCP_FWF_AD-7.4-valid-vce-dumps.html
