Printing of PDFs allowed
642-832 PDF file is the common choice by many IT candidates. You can download and store in your phone or your computer, and scan and study it. While there are many people choose to print 642-832 practice dumps into paper study material for better memory. 642-832 paper dumps is available to make notes, you will find the notes obviously when review next time. Troubleshooting and Maintaining Cisco IP Switched Networks (TSHOOT) 642-832 valid study collection will give you an in-depth understanding of the contents and help you to make out a detail study plan for 642-832 Troubleshooting and Maintaining Cisco IP Switched Networks (TSHOOT) preparation. All the questions are researched and produced according to the analysis of data and summarized from the previous test, which can ensure the high hit rate. You just need take the spare time to study 642-832 PDF file, then the knowledge you get from the 642-832 practice dumps are enough for passing the actual test. Beside, you will enjoy one year free update after purchasing our Cisco 642-832 training material.
642-832 valid test training will be a breeze to get your 642-832 certification. We will help whenever you need: 24*7 dedicated email and chat support are available. Besides, we ensure you a flawless shopping experience by Credit Card. You can get passed by our valid 642-832 practice dumps.
100% accurate and updated products
When you find our 642-832 Troubleshooting and Maintaining Cisco IP Switched Networks (TSHOOT) valid vce collection from plenty of dump information, you certainly want it to be the best valid and accurate 642-832 practice dumps, which can ensure you pass at first attempt. Now, we know time and energy are very precious for all of you. While the 642-832 vce cram can save lots of time and energy by providing the most accurate and updated 642-832 practice dumps. Our questions are edited based on vast amounts of original data, and the quantities and quality of 642-832 practice dumps are strictly controlled and checked by our senior professionals. The Troubleshooting and Maintaining Cisco IP Switched Networks (TSHOOT) 642-832 dump answers along with the questions are correct and with high accurate. Our professionals try best to make explanations easier to be understood for all of you. While, you may know there often have some changes about the 642-832 actual test, we guarantee to offer you the best latest 642-832 training material. Every day, there are specialists who trace and check if it is any update information about 642-832 study VCE. The new information is added into the Cisco 642-832 study VCE, and the useless questions are deleted, thus you can get the best valid and refined 642-832 training material. Our 642-832 free demo pdf can provide you a better and efficiency study preparation for your coming test, a 100% success is no longer the problem.
Do you want to be outstanding in the job interview? You may know, the employer will admire the people who are certified by 642-832 certification. People who get the 642-832 certification show dedication and willingness to work hard, also have strong ability to deal with issues during work. It seems that Troubleshooting and Maintaining Cisco IP Switched Networks (TSHOOT) 642-832 certification becomes one important certification in the IT industry. While, a good study material will do great help in Cisco 642-832 exam preparation. 642-832 latest training dumps will solve your problem and bring light for you.
Cisco 642-832 Dumps Instant Download: Upon successful payment, Our systems will automatically send the product you have purchased to your mailbox by email. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)
Cisco 642-832 Exam Syllabus Topics:
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Troubleshoot Layer 3 Technologies | 35% | - Troubleshoot EIGRP - Troubleshoot route redistribution - Troubleshoot OSPF - Troubleshoot BGP - Troubleshoot First Hop Redundancy Protocols |
| Topic 2: Troubleshoot Layer 2 Technologies | 30% | - Troubleshoot Spanning Tree Protocol - Troubleshoot VLANs and trunking - Troubleshoot switch security features - Troubleshoot EtherChannel |
| Topic 3: Troubleshoot IP Services and IPv6 | 15% | - Troubleshoot IPv6 routing and coexistence - Troubleshoot DHCP and NAT - Troubleshoot network services |
| Topic 4: Maintain and Monitor Network Performance | 20% | - Use Cisco IOS troubleshooting tools - Utilize troubleshooting methodologies - Plan and perform scheduled network maintenance |
Cisco Troubleshooting and Maintaining Cisco IP Switched Networks (TSHOOT) Sample Questions:
DRAG DROP
FCAPS is a network maintenance model defined by ISO. FCAPS stands for:
Correct Answer:
Explanation:
F-> Fault Management C-> Configuration Management A -> Accounting Management
FCAPS -> Fault, Configuration, Accounting, Performance and Security (ISO)
You have 2 NTP servers in your network - 10.1.1.1 and 10.1.1.2. You want to configure a Cisco router to use 10.1.1.2 as its NTP server before falling back to 10.1.1.1. Which commands will you use to configure the router?
- A. ntp server 10.1.1.1 ntp server 10.1.1.2
- B. ntp server 10.1.1.1 ntp server 10.1.1.2 prefer
- C. ntp server 10.1.1.1 ntp server 10.1.1.2 primary
- D. ntp server 10.1.1.1 fallback ntp server 10.1.1.2
Correct Answer: B 🗳️
Explanation: Only visible for TrainingDumps members. You can sign-up / login (it's free).
The implementations group has been using the test bed to do a `proof-of-concept' that requires both Client
1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network
addressing, routing schemes, DHCP services, NTP services, layer 2 connectivity, FHRP services, and
device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241
address.
Use the supported commands to isolate the cause of this fault and answer the following question.
The fault condition is related to which technology?
- A. Ipv6 RIP Routing
- B. Ipv4 Route Redistribution.
- C. NTP
- D. Ipv6 OSPF Routing
- E. Ipv4 OSPF Routing
- F. Ipv4 and Ipv6 Interoperability
- G. IP DHCP Server
- H. Ipv4 EIGRP Routing.
- I. Ipv4 layer 3 security.
Correct Answer: G 🗳️
Topic 5, Ticket 3 : OSPF Authentication
Topology Overview (Actual Troubleshooting lab design is for below network design)
Client Should have IP 10.2.1.3
EIGRP 100 is running between switch DSW1 & DSW2
OSPF (Process ID 1) is running between R1, R2, R3, R4
Network of OSPF is redistributed in EIGRP
BGP 65001 is configured on R1 with Webserver cloud AS 65002
HSRP is running between DSW1 & DSW2 Switches
The company has created the test bed shown in the layer 2 and layer 3 topology exhibits.
This network consists of four routers, two layer 3 switches and two layer 2 switches.
In the IPv4 layer 3 topology, R1, R2, R3, and R4 are running OSPF with an OSPF process number 1.
DSW1, DSW2 and R4 are running EIGRP with an AS of 10. Redistribution is enabled where necessary.
R1 is running a BGP AS with a number of 65001. This AS has an eBGP connection to AS 65002 in the ISP's network. Because the company's address space is in the private range.
R1 is also providing NAT translations between the inside (10.1.0.0/16 & 10.2.0.0/16) networks and outside (209.65.0.0/24) network.
ASW1 and ASW2 are layer 2 switches.
NTP is enabled on all devices with 209.65.200.226 serving as the master clock source.
The client workstations receive their IP address and default gateway via R4's DHCP server.
The default gateway address of 10.2.1.254 is the IP address of HSRP group 10 which is running on DSW1 and DSW2.
In the IPv6 layer 3 topology R1, R2, and R3 are running OSPFv3 with an OSPF process number 6.
DSW1, DSW2 and R4 are running RIPng process name RIP_ZONE.
The two IPv6 routing domains, OSPF 6 and RIPng are connected via GRE tunnel running over the underlying IPv4 OSPF domain. Redistrution is enabled where necessary.
Recently the implementation group has been using the test bed to do a `proof-of-concept' on several implementations. This involved changing the configuration on one or more of the devices. You will be presented with a series of trouble tickets related to issues introduced during these configurations.
Note: Although trouble tickets have many similar fault indications, each ticket has its own issue and
solution.
Each ticket has 3 sub questions that need to be answered & topology remains same.
Question-1 Fault is found on which device,
Question-2 Fault condition is related to,
Question-3 What exact problem is seen & what needs to be done for solution
Client is unable to ping IP 209.65.200.241
Correct Answer:
Solution Steps need to follow as below:
When we check on client 1 & Client 2 desktop we are not receiving DHCP address from R4 Ipconfig ----Client will be receiving IP address 10.2.1.3
IP 10.2.1.3 will be able to ping from R4 , R3, R2 but not from R1
Check for neighborship of ospf sh ip ospf nei ----- Only one neighborship is forming with R2 & i.e. with R3
Since R2 is connected to R1 & R3 with routing protocol ospf than there should be 2 neighbors seen but only one is seen
Need to check running config of R2 & R3 for interface Sh run -------------------------- Interface Serial0/0/0/0.12 on R2
Sh run -------------------------- Interface Serial0/0/0/0 on R1
- Change required: On R1, for IPV4 authentication of OSPF command is missing and required to configure------ ip ospf authentication message-digest
So in ticket Answer to the fault condition will be as below for
The implementations group has been using the test bed to do a `proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, and FHRP services, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address.
Use the supported commands to isolated the cause of this fault and answer the following questions.
What is the solution to the fault condition?
- A. In Configuration mode, using the interface port-channel 13 command, then configure switchport trunk allowed vlan none followed by switchport trunk allowed vlan 20,200 commands.
- B. In Configuration mode, using the interface port-channel 23 command, then configure switchport trunk allowed vlan none followed by switchport trunk allowed vlan 20,200 commands.
- C. In Configuration mode, using the interface port-channel 13, port-channel 23, then configure switchport trunk none allowed vlan none followed by switchport trunk allowed vlan 10,200 commands.
- D. In Configuration mode, using the interface port-channel 23, port-channel, then configure switchport trunk allowed vlan none followed by switchport trunk allowed vlan 10,20,200 commands.
Correct Answer: C 🗳️
Explanation: Only visible for TrainingDumps members. You can sign-up / login (it's free).
Viewing page 1 out of 14 pages.
Viewing questions 1-5 out of 70 questions.
Cara 
Madeline 
Arnold 
Doreen 
Baldwin 
Rachel 
Maud 
Ivan 
Jonas 
Hugh 
Bblythe 
Bert 
Zara 
Vera 
Isaac 
Harold 
